configure erps name

configure erps old-ring-name name new-ring-name

Description

`old-ring-name`	Alphanumeric string that identifies the ERPS ring.
`new-ring-name`	New alphanumeric string identifying the ERPS ring.

N/A.

Use this command to rename the ERPS ring or sub-ring.

The following command an ERPS ring from “ring1” to “ring2”:

configure erps ring1 name ring2

This command was first available in ExtremeXOS 15.1.

This command is available on all platforms supported in 12.6 and forward that are running ExtremeXOS.

Published August 2017prev | next