enable snmp traps lldp-med

enable snmp traps lldp-med {ports [all | port_list]}


Enables the transmission of LLDP (Link Layer Discovery Protocol) SNMP (Simple Network Management Protocol) trap notifications related to LLDP MED extension TLVs.

Syntax Description

all Specifies all ports on the switch.
port_list Specifies one or more ports or slots and ports.



Usage Guidelines

If you do not specify any ports, the system sends LLDP-MED traps for all ports.


The following command enables LLDP-MED SNMP traps for all ports:

enable snmp traps lldp-med ports all


This command was first available in ExtremeXOS 11.5.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.