Displays the output of various show commands to assist in monitoring and troubleshooting the switch; use only in conjunction with Extreme Networks Technical support.
| all | Indicates all available show command output to be displayed. |
| area | Specifies one tech support area. For example, if you want to view STP (Spanning Tree Protocol) information, enter stp. |
| detail | Specifies more detailed information. |
| logto [file] | Instructs the switch to log the show tech-support output into a file located in the switch‘s internal memory. The default file name is show_tech.log.tgz. |
N/A.
Note
Use this command only under the guidance of Extreme Networks Technical Support personnel to view your switch configurations and to troubleshoot the switch.This information can be useful for your technical support representative if you experience a problem.
Depending on the software version running on your switch, the configurations running on your switch, and the type of switch you have, additional or different show command and configuration output may be displayed.
The following example displays the show command output on the switch:
show tech-support
This command was first available in ExtremeXOS 10.1.
The command name and command syntax was modified in ExtremeXOS Release 15.4 from show tech to show tech-support.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB