disable access-list refresh blackhole

disable access-list refresh blackhole

Description

Disables blackholing of packets during ACL (Access Control List) refresh.

Syntax Description

This command has no arguments or variables.

Default

The feature is enabled.

Usage Guidelines

When access control lists (ACLs) are refreshed, this feature provides that any packets arriving during the refresh will be blackholed.

If you disable this feature, the ACLs will be refreshed as described in the refresh policy command.

To enable this feature, use the following command:

enable access-list refresh blackhole

Example

The following command disables dropping of packets during an ACL refresh:
disable access-list refresh blackhole

History

This command was first available in ExtremeXOS 11.0.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.