enable ntp vlan

enable ntp [{vlan} vlan-name | all] {{vr} vr_name}

Description

Enables NTP on a VLAN (Virtual LAN).

Syntax Description

enable Enables NTP on a VLAN.
vlan-name Specifies the name of a particular VLAN on which to enable or disable NTP.
all Enables or disables NTP on all VLANs.
vr Specifies setting up NTP on a VR.
vr_name Specifies the VR name to enable NTP on. If a VR name is not specified, the VR of current command context is used.

Default

NTP is disabled on all VLANs by default.

Usage Guidelines

N/A.

Example

The following command enables NTP on a VLAN named “Southwest”:

enable ntp vlan Southwest

History

This command was first available in ExtremeXOS 12.7.

The vr option was added in ExtremeXOS 22.2

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.