Use this command to set the NetLogin trap setting for system, module and port.
| enable | Enable sending traps when max users reached in system |
| disable | Disable sending traps when max users reached in system |
Disabled.
The specifications from this command appear in show configuration {module-name} {detail} for "policy" and "netlogin."
This example shows how to enable the NetLogin maximum users trap setting:
configure netlogin trap max-users enabled
This command was first available in ExtremeXOS 16.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, and X770.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB