Configures the allowed interval at which SNMP (Simple Network Management Protocol) notifications are sent.
| seconds | Specifies the interval at which LLDP (Link Layer Discovery Protocol) SNMP notifications are sent. The range is 5 to 3600 seconds. |
5 seconds.
This is a global timer. If one port sends a notification, no notifications for other ports go out for the configured interval.
The following command configures an interval of 60 seconds for LLDP SNMP notifications:
configure lldp snmp-notification-interval 60
This command was first available in ExtremeXOS 11.2.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB