show inline-power configuration ports

show inline-power configuration ports port_list

Description

Displays inline power configuration information for the specified ports.

Syntax Description

port_list Specifies one or more ports.

Default

N/A.

Usage Guidelines

The output displays the following inline power configuration information for the specified ports:
  • Config—Indicates whether the port is enabled to provide inline power:
    • Enabled: The port can provide inline power.

    • Disabled: The port cannot provide inline power.

  • Operator Limit—Displays the configured limit, in milliwatts, for inline power on the port.

  • Label—Displays a text string, if any, associated with the port.

Example

The following command displays inline power configuration information for ports 1 to 10 on a switch:

show inline-power configuration port 1-10

Following is sample output from this command:

Port   Config   Operator Limit   Priority   Label
1    Enabled     15000 mW      Low
2    Enabled     15000 mW      Low
3    Enabled     15000 mW      Low
4    Enabled     15000 mW      Low
5    Enabled     15000 mW      Low
6    Enabled     15000 mW      Low
7    Enabled     15000 mW      Low
8    Enabled     15000 mW      Low
9    Enabled     15000 mW      Low
10   Enabled     15000 mW      Low

History

This command was first available in ExtremeXOS 11.1

Platform Availability

This command is available on the PoE (Power over Ethernet) devices listed in Extreme Networks PoE Devices.