Displays current software license level, port speed licensing, and feature packs enabled on your switches.
This command has no arguments or variables.
N/A.
The command displays information on the software license level and feature packs enabled on the switch, including the trial license and days left to expiry.
To see the license information on a SummitStack node, run the command while logged into that node.
Note
Refer to the specific chapter of the ExtremeXOS 22.2 User Guide that discusses each feature to determine if a license is required for some functionality. If not noted, all functionality is available, and license is not required.The following command displays the license level configuration:
show licenses
On a SummitStack, the output from this command looks similar to the following:
Slot-3 Stack.12 > show licenses Enabled License Level: Advanced Edge Enabled Feature Packs: None Effective License Level:Edge
The show output also includes the current status of the non-Extreme optical device license:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB# show license
Enabled License Level:
Advanced Core
Enabled Feature Packs:
MPLS ServiceProviderEdge 3rdPartyOptics
For ExtremeSwitching X870-96x-8c switches, port speed license information appears:
# show license
Enabled License Level:
Advanced Edge
Enabled Feature Packs:
DirectAttach
Enabled Port Speed:
4 ports (81, 85, ..., 93) can be partitioned to 1x100G, 2x50G, 1x40G, 4x25G, or 4x10G.
This command was first available in ExtremeXOS 11.1.
The information on enabled feature packs was added in ExtremeXOS 11.4.
The information on the trial licenses was added in ExtremeXOS 11.6.
The show output was updated to include the current status of the non-Extreme optical device license in ExtremeXOS 15.4.
ExtremeSwitching X870-96x-8c switch port speed license information was added in ExtremeXOS 22.2
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.