show ipconfig

show ipconfig {ipv4} {vlan vlan_name}

Description

Displays configuration information for one or more VLAN (Virtual LAN)s in the current VR context.

Syntax Description

vlan_name Specifies a VLAN name.

Default

N/A.

Usage Guidelines

If no VLAN information is specified, then global IP configuration is displayed. Otherwise, specific VLAN information is displayed.

Example

* switch # show ipconfig
        Use Redirects : Disabled
        IpOption LSRR : Enabled
        IpOption SSRR : Enabled
          IpOption RR : Enabled
          IpOption TS : Enabled
          IpOption RA : Enabled
        Route Sharing : Disabled
    Originated Packets : Don't require ipforwarding
    IP Fwding into LSP : Disabled
   Max Shared Gateways : Current: 4  Configured: 4
   Route Sharing Hash : XOR, Custom Method 
   Ping Protection : Enabled for static routes Interval: 2 Misses: 3
        IRDP:            
            Advertisement Address: 255.255.255.255      
            Maximum Interval: 600
            Minimum Interval: 450     Lifetime: 1800    Preference: 0        
    Interface    IP Address          Flags                  nSIA   
    data2        200.0.0.1       /24 EUf---MPuRX--------    0
    inet         1.1.1.2         /24 EUf---MPuRX--------    0
    mytun        2.0.0.2         /24 EU----MPuRX--------    0

History

This command was first available in ExtremeXOS 10.1.

The ipv4 keyword was added in ExtremeXOS 11.2.

This command changed to display information for the current VR context in ExtremeXOS 12.5.

Ping protection information added in ExtremeXOS 22.1.

Route sharing hashing algorithm (default or custom) added in ExtremeXOS 22.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.