Displays the configuration for all fast-reroute profiles.
| detail | Displays the profile information in verbose format. |
N/A.
None.
The following command displays summary configuration information for all fast-reroute profiles:
# show mpls rsvp-te profile fast-reroute FRR Profile Name Mode Bandwidth SPri HPri HopLmt P-BW P-Node #LSP ---------------- ------ --------- ---- ---- ------ ---- ------ ---- default_frr Detour 10 7 0 3 Dis Ena 4 prf1_frr Detour 0 7 0 3 Dis Ena 2
The following command displays detailed configuration information for all fast-reroute profiles:
# show mpls rsvp-te profile fast-reroute detail Profile Name : prf1_frr Peak Rate : 0 Kbps Committed Rate : 0 Kbps Max Burst Size : 0 Kb Setup Priority : 7 Hold Priority : 4 Hop Limit : 1 Protected BW : Off Protect Node : On #LSP References : 2 LSP / Path : pc10_lsp / p1 Profile Name : default_frr Peak Rate : 0 Kbps Committed Rate : 0 Kbps Max Burst Size : 0 Kb Setup Priority : 4 Hold Priority : 0 Hop Limit : 2 Protected BW : On Protect Node : On #LSP References : 4 LSP / Path : pc_frr_lsp / p2
This command was first available in ExtremeXOS 12.1.
This command is available only on the platforms that support MPLS (Multiprotocol Label Switching) as described in the ExtremeXOS 22.2 Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB