show openflow

show openflow

Description

Shows whether OpenFlow is enabled or disabled globally on the switch.

Syntax Description

This command has no keywords or variables.

Default

None.

Usage Guidelines

None.

Example

The following example displays the current configuration for the primary controller:

* (Private) SDN-1.1 # show openflow
OpenFlow:          Enabled
Versions:          OpenFlow10, OpenFlow13
Mode:              Standard
FDB:               On
Access-list width: Double

Controller       : Primary
    Status       : ACTIVE
    Datapath ID  : 00000004968374d4
    VR           : VR-Default
    Mode         : out-of-band Active
    Target       : tcp:10.66.65.242:6633
    Uptime(secs) : 1134555

Controller       : Secondary
    Not configured.

                                            Flows
VLAN                             VID  Ports Active Error
-------------------------------- ---- ----- ------ ------
major                            4089     3      2      0

Total number of VLAN(s): 1

History

This command was first available in ExtremeXOS 15.3.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the BGP (Border Gateway Protocol) feature, see the ExtremeXOS 22.2 Feature License Requirements document.