show netlogin guest-vlan

show netlogin guest-vlan [ {vlan} vlan_name | vlan vlan_list]


Displays the configuration for the guest VLAN (Virtual LAN) feature.

Syntax Description

vlan_name Specifies the name of a guest VLAN.
vlan_list Specifies the guest VLAN list of IDs.



Usage Guidelines

Use this command to display the guest VLANs configured on the switch.

If you specify the vlan_name, the switch displays information for only that guest VLAN.

The output displays the following information in a tabular format:
  • Port—Specifies the 802.1X enabled port configured for the guest VLAN.
  • Guest-vlan—Displays the enabled/disabled state of the guest VLAN feature.
  • Vlan—Specifies the name of the guest VLAN.


The following sample output displays the local network login list:

# show netlogin guest-vlan

Port      Guest-vlan      Vlan
5:1      Disabledgvl1
5:2      Enabledgvl2
5:3      Disabledgvl3
5:4      Enabledgvl4


This command was first available in ExtremeXOS 11.6.

The vlan_list variable was added in ExtremeXOS 16.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.