show private-vlan name

show {private-vlan} name


Displays information about the specified PVLAN.

Syntax Description

name Specifies the name of the PVLAN to display.



Usage Guidelines

If the PVLAN is incomplete because it does not have a network or any subscriber VLAN (Virtual LAN) configured, [INCOMPLETE] appears next to the PVLAN name.


The following example output displays information for the companyx PVLAN:

# show private-vlan "Engineering"
Name            VID  Protocol Addr        Flags                Proto  Ports  Virtual
Active router
Network VLAN:
-Engr1         10   --------------------------------------   ANY    4 /5   VR-Default
Non-Isolated Subscriber VLAN:
-ni1           400  --------------------------------------   ANY    1 /1   VR-Default
-ni2           401  -------------------------------------    ANY    1 /1   VR-Default
Isolated Subscriber VLAN:
-i1            500  -------------------------------------    ANY    1 /1   VR-Default
Flags : (C) EAPS Control vlan, (d) NetLogin Dynamically created VLAN,
(D) VLAN Admin Disabled, (E) ESRP Enabled, (f) IP Forwarding Enabled,
(i) ISIS Enabled, (I) IP Forwarding lpm-routing Enabled, (L) Loopback Enabled,
(l) MPLS Enabled, (m) IPmc Forwarding Enabled, (n) IP Multinetting Enabled,
(N) Network LogIn vlan, (o) OSPF Enabled, (p) PIM Enabled,
(P) EAPS protected vlan, (r) RIP Enabled,
(T) Member of STP Domain, (V) VPLS Enabled, (v) VRRP Enabled


This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available on all platforms that support the Private VLAN feature. For features and the platforms that support them, see the ExtremeXOS 22.2 Feature License Requirements document.