reset inline-power ports

reset inline-power ports port_list

Description

Power cycles the specified ports.

Syntax Description

port_list Specifies one or more ports or slots and ports for which power is to be reset.

Default

N/A.

Usage Guidelines

This command power cycles the specified ports. Ports are immediately disabled and then re-enabled, allowing remote PDs to be power-cycled.

This command affects only inline power; it does not affect network connectivity for the port(s).

Example

The following command resets power for port 4 on a switch:

reset inline-power ports 4

History

This command was first available in ExtremeXOS 11.1.

Platform Availability

This command is available on the PoE (Power over Ethernet) devices listed in Extreme Networks PoE Devices.