configure lldp reinitialize-delay
configure lldp reinitialize-delay seconds
Description
Configures the delay before the receive state machine is reinstalled once the LLDP (Link Layer Discovery Protocol) transmit mode has been disabled.
Syntax Description
seconds | Specifies the delay that applies to the reinitialization attempt. The range is 1 to 10 seconds. |
Default
2 seconds.
Usage Guidelines
N/A.
Example
The following command configures a reinitialization delay of 10 seconds:
configure lldp reinitialize-delay 10
History
This command was first available in ExtremeXOS 11.2.
Platform Availability
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.