create virtual-network remote-endpoint vxlan ipaddress

create virtual-network remote-endpoint vxlan ipaddress ipaddress {vr vr_name}


This command creates a remote endpoint.

Syntax Description

ipaddress A remote endpoint IP address.
vr VR/VRF instance the remote endpoint is associated with
vr_name An existing VR/VRF name.



Usage Guidelines

This command is useful when you want to explicitly add a remote endpoint in addition to the ones learnt dynamically (OSPF (Open Shortest Path First) extensions). In flood mode explicit, you must create a remote-endpoint using this command, if the configurations on remote-endpoint (like monitor) need to be saved to the configuration. Otherwise, the configuration will be lost after the switch reboots.


To create a remote endpoint:

create virtual-network vxlan remote-endpoint ipaddress


This command was first available in ExtremeXOS 21.1.

Platform Availability

This command is supported on the Summit X770, X670-G2, and ExtremeSwiching X870, X690 series switches, and stacks with X770, X670-G2, X870, and X690 slots only.