configure cdp power-available ports

configure cdp power-available [advertise | no-advertise] ports [port_list | all]

Description

This command configures the advertising status of the power available TLV on CDP ports.

advertise	Specifies to send the TLV to neighbors.
`no-advertise`	Specifies not to send the TLV to neighbors.
`port_list`	Port list separated by a comma or -";

No-advertise.

This command is for PoE (Power over Ethernet) switches.

The following example advertises the Power Available TLV on port 1:

configure cdp power-available advertise ports 1

The following example does not advertise the Power Available TLV on port 1:

configure cdp power-available no-advertise ports 1

This command was first available in ExtremeXOS 21.1.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published August 2017prev | next