configure msrp sharing

configure msrp sharing [all | port_list] bandwidth [cumulative | single-port] percentage


This command configures the LAG (Link Aggregation Group) bandwidth mode as either cumulative or master-port only.

Syntax Description

all All the ports in the switch.
port_list Port list separated by a comma or -
cumulative Use bandwidth of a single port, plus a percentage of bandwidth of every other LAG member port in the group.
single-port Use bandwidth of a single port only for the entire LAG.
percentage Percentage of bandwidth of each LAG port to be added to master port bandwidth.



Usage Guidelines

If cumulative mode is selected, the percentage is also configured.


This CLI command displays bandwidth information of an MSRP port.

# show msrp ports bandwidth 
Port       Port  Class    Delta    Maximum   Reserved   Available
          Speed                    Effective 
------   ------- -----   --------- ---------  ---------  --------- 
5ab          0 M A          75.00%   0.00%       0.00%      0.00%
                 B           0.00%   0.00%       0.00%      0.00%
*21ab     1000 M A          75.00%   75.00%      0.00%     75.00% 
                 B           0.00%   75.00%      0.00%     75.00% 
Flags: (*) Active, (!) Administratively disabled,  
       (a) SR Class A allowed, (b) SR Class B allowed. 


This command was first available in ExtremeXOS 21.1.

Platform Availability

This command is available on Summit X450-G2, X460-G2, and X670-G2 switches if the AVB feature pack license is installed on the switch.