show mpls rsvp-te interface

show mpls rsvp-te interface {{vlan} vlan_name} {detail | counters}

Description

Displays RSVP-TE information about MPLS (Multiprotocol Label Switching) interfaces.

Syntax Description

vlan Display information for one VLAN (Virtual LAN).
vlan_name Specifies the name of the VLAN.
detail Display RSVP-TE information including the interface up time and LDP control packet counts.
counters Display only the RSVP-TE control protocol packet counts.

Default

N/A.

Usage Guidelines

This command displays RSVP-TE information about MPLS interfaces. Summary information is displayed in tabular format for all VLANs that are configured for MPLS. The following information is displayed:
  • VLAN name.
  • Bandwidth reserved.
  • TE metric.
  • Hello interval time.
  • Refresh interval time.
  • Summary refresh time.
  • Bundle message time.
  • Uptime.
  • Number of neighbors.
  • RSVP-TE state information
When the optional detail keyword is specified, additional RSVP-TE information is displayed. This additional information includes:
  • RSVP-TE hello keep multiplier.
  • RSVP-TE refresh keep multiplier.
  • RSVP-TE available bandwidth per priority level.
  • RSVP-TE control protocol packet counts.

When the optional counters keyword is specified, only the RSVP-TE control protocol packet counts are shown.

Example

The following command displays detailed RSVP-TE information for the interfaces associated with VLAN 1:

# show mpls rsvp-te interface vlan1 det
VLAN Name : vlan1
Local IP Address          : 11.121.96.20
MPLS Admin Status         : Enabled
MPLS Oper Status          : Enabled
RSVP-TE Admin Status      : Enabled
RSVP-TE Oper Status       : Enabled
RSVP-TE Up-Time           : 0d:1h:19m:46s
# Neighbors               : 1
Receive CIR               : 50000 Kbps
Transmit CIR              : 50000 Kbps
TE Metric                 : Use IGP Cost/Metric
Hello Interval            : 3 seconds
Refresh Time              : 30 seconds
Hello Keep Multiplier     : 3
Refresh Keep Multiplier   : 3
Summary Refresh           : Disabled
Summary Refresh Time      : 3000 milliseconds
Bundle Message            : Disabled
Bundle Message Time       : 1000 milliseconds
----------------------------------------------------------
Dir  Pool     CIR Available (per priority level)
0     1     2     3     4     5     6     7
----------------------------------------------------------
Rx     50    50    50    50    50    50    50    50    50
Tx     50    50    50    50    50    50    50    50    40
(Rx)Receive Bandwidth  (Tx)Transmit Bandwidth
Message                  Sent    Received
----------------   ----------  ----------
PATH                      165         165
PATH_TEAR                   2           3
PATH_ERR                    4          18
RESV                      160         145
RESV_TEAR                   0           2
RESV_ERR                    0           0
RESV_CONFIRM                4           1
SUMMARY_REFRESH             0           0
BUNDLE                      0           0
HELLO                      42          30

History

This command was first available in ExtremeXOS 11.6.

Platform Availability

This command is available only on the platforms that support MPLS as described in the ExtremeXOS 22.2 Feature License Requirements document.