disable erps topology-change

disable erps ring-name topology-change

Description

Disable the ability of ERPS (Ethernet Ring Protection Switching) to set the topology-change bit to send out Flush events.

`ring-name`	Alphanumeric string that identifies the ERPS sub-ring.
topology-change	Topology change propagation control.

N/A.

Use this command to disable the ability of ERPS to set the topology-change bit to send out Flush events.

The following example disables the ability to set the topology-change bit for an existing ERPS sub-ring identified as “ring1”:

disable erps ring1 topology-change

This command was first available in ExtremeXOS 15.1.

This command is available on all platforms supported in 12.6 and forward that are running ExtremeXOS.

Published August 2017prev | next