configure iparp add

configure iparp add ip_addr {vr vr_name} mac


Adds a permanent entry to the ARP table. You must specify the IP address and MAC address of the entry.

Syntax Description

ip_addr Specifies an IP address.
vr_name Specifies a VR name.
mac Specifies a MAC address.


If you do not specify a VR or VRF, the current VR context is used.

Usage Guidelines



The following example adds a permanent IP ARP entry to the switch for IP address

configure iparp add 00:11:22:33:44:55


This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.