configure network-clock ptp (priority)

configure network-clock ptp [boundary | ordinary] [priority1 | priority2] priority

Description

Assign priority1 and priority2 values for a PTP clock instance.

boundary	Boundary clock instance.
ordinary	Ordinary clock instance.
priority1	Priority1 of the clock.
priority2	Priority2 of the clock.
`priority`	Value of priority. 0 is the highest priority. The default value is 128, the range is 0-255.

The default value of the priority is 128. The range is 0-255.

Use this command to assign priority1 and priority2 values for a PTP clock instance. This command is available only for boundary and ordinary clocks.

The following example assigns priority1 and priority2 values for the boundary clock:

configure network-clock ptp boundary priority1 50
configure network-clock ptp boundary priority2 128

The following example assigns priority1 and priority2 values for ordinary clock:

configure network-clock ptp ordinary priority1 10
configure network-clock ptp ordinary priority2 200

This command was first available in ExtremeXOS 15.1.

This command is available on Summit X770, X670-G2, and X460-G2 series switches.

Note

PTP commands can be used only with the Network Timing feature pack.

Published August 2017prev | next