Enables or disables allowing IP fragmentation for the SNMP (Simple Network Management Protocol) PDUs.
|
compatibility |
Compatibility options. |
|
ip-fragmentation |
Compatibility option relate to the IP fragmentation for SNMP PDUs. |
|
allow |
All fragmentation of outgoing SNMP PDUs. |
|
disallow |
Set Do not Fragment (DF) bit in outgoing SNMP PDUs. |
Disallow.
Use this command to enable or disable allowing IP fragmentation for the SNMP PDUs.
The following example shows output of the show management command:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB
Switch # show management
CLI idle timeout : Enabled (20 minutes)
CLI max number of login attempts : 3
CLI max number of sessions : 8
CLI paging : Enabled (this session only)
CLI space-completion : Disabled (this session only)
:
:
:
SNMP access : Enabled
: Access Profile : not set
SNMP Compatibility Options :
IP Fragmentation : Allow
SNMP Traps : Enabled
:
:
This command was first available in ExtremeXOS 15.5.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.