show bfd session client

show bfd session client [ bgp {ipv4 | ipv6} | mpls | ospf {ipv4 | ipv6} | static {ipv4 | ipv6}] {vr [vrname | all]}


Displays the BFD session information for a specified client.

Syntax Description

bgp BGP (Border Gateway Protocol)
mpls Specifies an MPLS (Multiprotocol Label Switching) client.
ospf OSPF (Open Shortest Path First) protocol.
ipv4 Displays sessions requested by IPv4 version client, e.g. OSPFv2 (Default).
ipv6 Displays sessions requested by IPv6 version client, e.g. OSPFv3 (Open Shortest Path First version 3).
static Specifies a static route.
vrname Specifies the name of the virtual router.



Usage Guidelines

Use this command to display session information for a specified client.


The following command displays the BFD sessions for an MPLS client on all VRs:

show bfd session client mpls vr all

Following is sample output from this command:

Neighbor     Interface      Detection   Status
---------     --------       ---------   -----    vlan10      3000        Up
NOTE: All timers in milliseconds.


This command was first available in ExtremeXOS 12.4.

Support for BFD protected static route was added in ExtremeXOS 12.5.3.

The ospf keyword was added in ExtremeXOS 15.3.2.

Support for border gateway protocol (BGP) was added in ExtremeXOS 21.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.