Displays the association between parameter names and filter profiles.
hex_profile_name | Specifies the filter profile name. The value is to be supplied as a colon separated string of hex octets. |
profile_name | Specifies the filter profile name in ASCII format. |
hex_param_name | Specifies the parameter name. The values is to be supplied as a colon separated string of hex octets. |
param_name | Specifies the parameter name in ASCII format. |
N/A.
Use this command to display the snmpNotifyFilterProfileTable. This table associates a filter profile with a parameter name. The parameter name is associated with target addresses, and the filter profile is associated with a series of filters, so, in effect, you are associating a series of filters with a target address.
The following command displays the entry with filter profile prof1 with the parameter name P1:
show snmpv3 filter-profile prof1 param P1
The following is sample output of this command:
Filter Profile Params Name : p1 Name : prof1 Storage Type : NonVolatile Row Status : Active
This command was first available in ExtremeXOS 10.1.
The hex_profile_name and hex_param_name parameters were added in ExtremeXOS 11.0.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.