disable stacking-support

disable stacking-support


This command disables the stacking-support option on a Summit switch with dual-purpose hardware.

Syntax Description

This command does not have additional syntax.



Usage Guidelines

The Stacking-Support Option Control column in Summit Family Switch Support for Alternate Stack Ports displays Yes in the rows for switch configurations for which you can disable the stacking-support option.

After you disable the stacking-support option, you must reboot the switch to activate the configuration change.

If you disable the stacking-support option on a switch and reboot, stacking communication stops and the data ports listed in Summit Family Switch Support for Alternate Stack Ports use Ethernet protocols instead of stacking protocols.


To disable the stacking ports, enter the following command:

* switch # disable stacking-support
This setting will take effect at the next reboot of this switch.


This command was first available in ExtremeXOS 12.2.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.