Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

show inline-power stats ports

show inline-power stats ports port_list

Description

Displays inline power statistics for the specified ports.

Syntax Description

port_list Specifies one or more slots and ports.

Default

N/A.

Usage Guidelines

The output displays the following inline power statistics for the specified ports:
  • State—Displays the port power state:

    • Disabled.

    • Searching.

    • Delivering.

    • Faulted.

    • Disconnected.

    • Other.

    • Denied.

  • PD‘s power class—Displays the class type of the connected PD:

    • “-----”: disabled or searching.

    • “class0”: class 0 device.

    • “class1”: class 1 device.

    • “class2”: class 2 device.

    • “class3”: class 3 device.

    • “class4”: class 4 device.

  • Absent—Displays the number of times the port was disconnected.

  • InvSig—Displays the number of times the port had an invalid signature.

  • Denied—Displays the number of times the port was denied.

  • Over-current—Displays the number of times the port entered an overcurrent state.

  • Short—Displays the number of times the port entered undercurrent state.

Example

The following command displays inline power configuration information for ports 1 to 10 in node (slot) 3 on a SummitStack:

show inline-power stats ports 3:1-10

Following is sample output from this command:

STATISTICS COUNTERS
Port  State       Class     Absent  InvSig   Denied    OverCurrent   Short
3:1   delivering  class3        0       0       0         18             0
3:2   delivering  class3        0       0       0          0             0
3:3   searching   class0        0       0       0          0             0
3:4   searching   class0        0       0       0          0             0
3:5   searching   class0        0       0       0          0             0
3:6   searching   class0        0       0       0          0             0
3:7   searching   class0        0       0       0          0             0
3:8   searching   class0        0       0       0          0             0
3:9   searching   class0        0       0       0          0             0
3:10  searching   class0        0       0       0          0             0

History

This command was first available in ExtremeXOS 11.1.

Platform Availability

This command is available on the PoE (Power over Ethernet) devices listed in Extreme Networks PoE Devices.

Published August 2017prev | next

Email this topicEmail this topic

Print this pagePrint this page