Assigns the primary or secondary ethertype value to the specified ports.
port_list | Specifies the list of ports to be configured. |
primary | Assigns the primary ethertype value to the specified ports. |
secondary | Assigns the secondary ethertype value to the specified ports. |
N/A.
None.
The following example configures port 2:1 to use the secondary ethertype:
configure port 2:1 ethertype secondary
This command was first available in ExtremeXOS 12.0.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.