configure dhcp ipv6 client identifier-type

configure dhcp ipv6 client identifier-type [ link-layer {plus-time} | vendor-specific

Description

This command configures the DHCPv6 client identifier type for the client. A DHCP (Dynamic Host Configuration Protocol) server uses this identifier-type to identify clients for the selection of configuration parameters.

Syntax Description

dhcp Configure DHCP
ipv6 Configure DHCP IPv6 client
client Configure DHCP IPv6 client
identifier-type Configure DHCP IPv6 client identifier type
link-layer Configure link-layer address (system MAC) as DHCP IPv6 client identifier
plus-time Configure link-layer address plus current time as DHCP IPv6 client identifer
vendor-specific Configure DHCP IPv6 client identifier by prepending the vendor-specific IANA value

Default

IPv4.

Usage Guidelines

Use this command to configure the DHCPv6 client identifier type for the client.

History

This command was first available in ExtremeXOS 15.6.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.