configure vlan netlogin-lease-timer

configure vlan vlan_name netlogin-lease-timer seconds


Configures the timer value returned as part of the DHCP (Dynamic Host Configuration Protocol) response for clients attached to networklogin-enabled ports.

Syntax Description

vlan_name Specifies the VLAN (Virtual LAN) to which this timer value applies.
seconds Specifies the timer value, in seconds.


10 seconds.

Usage Guidelines

The timer value is specified in seconds.

This command applies only to the web-based authentication mode of network login.


The following command sets the timer value to 15 seconds for VLAN corp:

configure vlan corp netlogin-lease-timer 15


This command was first available in ExtremeXOS 11.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.