enable stpd
enable stpd {stpd_name}
Description
Enables the STP (Spanning Tree Protocol) protocol for one or all STPDs.
Syntax Description
stpd_name | Specifies an STPD (Spanning Tree Domain) name on the switch. |
Default
Enabled.
Usage Guidelines
If you want to enable the STP protocol for all STPDs, do not specify an STPD name.
Example
The following command enables an STPD named Backbone_st:
enable stpd backbone_st
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.