create tunnel gre destination source

create tunnel tunnel_name gre destination destination-address source source-address

Description

Allows switch administrators to add a GRE tunnel. This command is in-line with adding an ipv6-in-ipv4 tunnel.

gre	Generic Routing Encapsulation tunnel.
`destination-address`	IPv4 destination address of the tunnel.
`source-address`	IPv4 source address of the tunnel.

No GRE tunnels exist in the system.

Use this command to add a GRE tunnel.

create tunnel myGREtunnel gre destination 10.0.0.2 source 10.0.0.1

This command was first available in ExtremeXOS 15.3.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published August 2017prev | next