unconfigure banner

unconfigure banner { after-login | before-login }


Unconfigures a specified banner from CLI screens.

Syntax Description

after-login Specifies the banner that is displayed after login.
before-login Specifies the banner that is displayed before login.



Usage Guidelines

Use this command to unconfigure one of two different types of banners:
  • CLI session before login.

  • CLI session after login.

If no optional parameters are specified, all configured banners are erased. To delete a specific banner, the before-login or after-login keyword must be used.

Banners can also be cleared by configuring a banner with only a <ret> or \n character.


The following command clears the after-login banner, Welcome to the switch:

unconfigure banner after-login [Return]


This command was first available in ExtremeXOS 12.5.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.