show bfd vlan counters

show bfd vlan {vlan_name} counters

Description

Displays BFD counters on a specified VLAN (Virtual LAN).

Syntax Description

vlan_name

Specifies the VLAN name.

Default

N/A.

Usage Guidelines

Use this command to display counter readings for a specified VLAN.

Example

The following command displays the counter readings for the VLAN vlan10:

show bfd vlan vlan10 counters

Following is sample output from this command:

VLAN                 								: vlan10
Valid Rx Pkt             : 144
Total Tx Pkt             : 144
Auth Type Fails          : 0
Authentication Fails     : 0
Discarded Pkt            : 0
Rx session Not Found     : 6
Note

Note

The Discarded Pkt counter is incremented when the neighbor state indicated in the BFD packet is not one of the expected/allowed states. The Rx session Not Found counter is incremented when the BFD session corresponding to the received BFD packet is not found.

History

This command was first available in ExtremeXOS 12.4.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.