configure ospfv3 area delete range

configure ospfv3 area area_identifier delete range ipv6netmask [inter-prefix | nssa]

Description

Removes a range of IPv6 addresses in an OSPFv3 (Open Shortest Path First version 3) area to be aggregated.

Syntax Description

area_identifier Specifies an OSPFv3 area, a four-byte, dotted decimal number.
ipv6netmask Specifies an IPv6 address / prefix length.
inter-prefix Inter-Area-Prefix LSAs.
nssa NSSA LSAs.

Default

No OSPFv3 inter-area-prefix LSAs are configured.

Usage Guidelines

If you attempt to delete a range that was not configured, you receive an error message.

Example

The following command is used to delete a summary network from area 0.0.0.1:

configure ospfv3 area 0.0.0.1 delete range 2aaa:456:3ffe::/64

History

This command was first available in ExtremeXOS 11.2.

The inter-prefix and nssa keywords were added in ExtremeXOS 21.1.

Platform Availability

This command is available on platforms with an Advanced Edge or Core license as described in the ExtremeXOS 22.2 Feature License Requirements document.