disable netlogin ports

disable netlogin ports ports [{dot1x} {mac} {web-based}]


Disables network login on a specified port for a particular method.

Syntax Description

ports Specifies the ports for which network login should be disabled.
dot1x Specifies 802.1X authentication.
mac Specifies MAC-based authentication.
web-based Specifies web-based authentication.


Network login is disabled by default.

Usage Guidelines

Network login must be disabled on a port before you can delete a VLAN (Virtual LAN) that contains that port.

This command applies to the MAC-based, web-based, and 802.1X mode of network login. To control which authentication mode is used by network login, use the following commands:

enable netlogin [{dot1x} {mac} {web-based}] disable netlogin [{dot1x} {mac} {web-based}]


The following command disables dot1x and web-based network login on port 2:9:

disable netlogin ports 2:9 dot1x web-based


This command was first available in ExtremeXOS 11.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.