show mpls

show mpls

Description

Displays MPLS (Multiprotocol Label Switching) configuration information.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines

The show mpls command displays the current values for all the MPLS configuration parameters that apply to the entire switch. The parameters displayed include:
  • MPLS and MPLS protocol (RSVP-TE and LDP) status.
  • SNMP (Simple Network Management Protocol) traps configuration.
  • EXP examination/replacement configuration.
  • the MPLS LSR ID.
  • the list of the VLANs which have been added to MPLS.

Example

The following command displays the MPLS configuration parameters for the switch:

# show mpls
MPLS System
MPLS System            : User VR (Green)
MPLS Admin Status      : Enabled
MPLS Oper Status       : Enabled
RSVP-TE Admin Status   : Enabled
RSVP-TE Oper Status    : Enabled
LDP Admin Status       : Enabled
LDP Oper Status        : Enabled
SNMP Traps             : Disabled
L2VPN SNMP Traps       : Enabled
EXP Examination        : Disabled
EXP Replacement        : Disabled
LSR ID                 : 11.100.100.20

History

This command was first available in ExtremeXOS 11.6

Platform Availability

This command is available only on the platforms that support MPLS as described in the ExtremeXOS 22.2 Feature License Requirements document.