Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

show rip interface

show rip interface {detail}

Description

Displays RIP (Routing Information Protocol)-specific configuration and statistics for all VLANs.

Syntax Description

detail

Specifies detailed display.

Default

Show summary output for all interfaces.

Usage Guidelines

Summary includes the following information per interface:

  • VLAN (Virtual LAN) name.

  • IP address and mask.

  • interface status.

  • packets transmitted.

  • packets received.

  • number of triggered updates.

  • cost.

Detail includes the following per interface:

  • VLAN name.

  • IP address and mask.

  • tx mode.

  • rx mode.

  • cost.

  • peer information (for each peer).

    • age.

    • version.

    • received packets.

    • received updates.

    • received bad packets.

    • received bad routes.

  • in policy.

  • out policy.

  • trusted gateway policy.

  • packets transmitted.

  • sent triggered updates.

  • packets received.

  • bad packets received.

  • bad routes received.

Example

The following command displays the RIP configuration for all VLANS:

show rip interface

The following is sample output from this command:

# show rip interface
VLAN       IP Address         Flags  Sent     Rcvd     Triggered Cost
Packets  Packets  Updates
Flags: (f) Interface Forwarding Enabled, (i) Interface RIP Enabled
(n) Multinetted VLAN, (r) Router RIP Enabled

The following command displays RIP-specific statistics for all VLANs:

show rip interface detail

History

This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on all platforms with an Edge, Advanced Edge, or Core license.

Published August 2017prev | next

Email this topicEmail this topic

Print this pagePrint this page