show elrp disabled-ports

show elrp disabled-ports

Description

Displays information about ELRP disabled ports.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines

This command displays the results of disabling ports using the configure elrp-client periodic command.

This command displays the following:
  • Excluded Ports—User defined ports that will not be disabled.

  • Exclude EAPS (Extreme Automatic Protection Switching) ring ports--Whether EAPS ring ports can be excluded.

  • Disabled Port—The port that ELRP disabled.

  • Detected VLAN (Virtual LAN)—The VLAN with looping ELRP PDU(s).

  • Duration—The configured time to keep the port disabled.

  • Time Disabled—The time when ELRP disabled the port.

Example

The following example shows ELRP information for disabled ports:

# show elrp disabled-ports 
Disabled Detected             Duration Time                       Disable 
Port     Vlan                 (sec)    Disabled                   Direction 
        --------------------------------------------------------------------------- 
2:46     v1                   40       Wed Dec 3 11:25:22 2014    Egress 
2:47     v2                   Perm     Wed Dec 3 11:25:21 2014    Ingress    
---------------------------------------------------------------------------

History

This command was first available in ExtremeXOS 12.4.

The excluded port list was added in ExtremeXOS 12.5.3.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.