configure stpd ports active-role disable

configure stpd stpd_name ports active-role disable port


Allows a port to be selected as an alternate or backup port.

Syntax Description

stpd_name Specifies an STPD (Spanning Tree Domain) name on the switch.
port Specifies a port.


The default is disabled.

Usage Guidelines

Use this command to revert to the default that allows a specified port to be elected to any STP (Spanning Tree Protocol) port role.


The following command disables an active role on STDP s1, port 6:3:

configure stpd s1 ports active-role disable 6:3


This command was first available in ExtremeXOS 12.5.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.