disable ripng splithorizon

disable ripng splithorizon {vlan vlan-name | tunnel tunnel_name | [vlan | tunnel] all}


Disables the split horizon algorithm for RIPng (Routing Information Protocol Next Generation).

Syntax Description

vlan-name Specifies an IPv6 configured VLAN (Virtual LAN).
tunnel_name Specifies an IPv6 tunnel.
all Specifies all interfaces.



Usage Guidelines

Split horizon is a scheme for avoiding problems caused by including routes in updates sent to the router from which the route was learned. Split horizon omits routes learned from a neighbor in updates sent to that neighbor.


The following command disables the split horizon algorithm for RIPng:

disable rip splithorizon


This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on platforms with an Edge, Advanced Edge, or Core license. For licensing information, see the ExtremeXOS 22.2 Feature License Requirements document.