enable elrp-client

enable elrp-client


Enables the Extreme Loop Recovery Protocol (ELRP) client (standalone ELRP) globally.

Syntax Description

This command has no arguments or variables.



Usage Guidelines

The ELRP client must be enabled globally in order for it to work on any VLAN (Virtual LAN)s.

The ELRP client can be disabled globally so that none of the ELRP VLAN configurations take effect. Use the disable elrp-client command to globally disable the ELRP client.

The ExtremeXOS software does not support ELRP and Network Login on the same port.


The following command globally enables the ELRP client:

enable elrp-client


This command was first available in ExtremeXOS 11.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.