show esvt traffic-test

show esvt traffic-test {{vlan} vlan_name}

Description

Displays statistics output for the Extreme Service Verification tool on the specified VLAN (Virtual LAN).

Syntax Description

vlan \Specifies the VLAN for the traffic test.
vlan_name Specifies a VLAN name.

Default

N/A.

Usage Guidelines

Use this command to display test output for the Extreme Service Verification tool on the specified VLAN.

Example

The following example displays show output for the Extreme Service Verification tool on vlan1 and vlan3:

VLAN  Status    Loopback  Duration  Tx rate Tx Frame Tx Total Rx Total
                       Port    (hh:mm:ss) (Mbps)  Size Frames  Frames 
============================================================================   
  V1  Running    2    00:09:00  50   64  2000   2000   
  V1  Stopped    4    00:20:00  150   128  3000   3000   
  V3  Completed  3    00:60:00  250   256  4000   4000   
  V1234567>   Error        7      00:10:00    100    9100         0        0      
============================================================================   
> Indicates vlan name string truncated past 8 characters       

# show esvt traffic-test detail   
VLAN Name                            : V1   
Port                                 : 9   
IP Address                           : 2.2.2.2   
Status                               : Running   
Duration (hh:mm:ss)                  : 00:10:00   
Time Remaining(hh:mm:ss)             : 00:09:00   
Loopback Port                        : 2   
Tx rate (Kpbs)                       : 200000   
Tx Frame Size (bytes)                : 64   
Tx Frames                            : 0   
Rx Frames                            : 0   
Frames Lost                          : 0       

VLAN Name                            : V1   
Port                                 : 3   
IP Address                           : 6.6.6.6   
Status                               : Stopped   
Duration (hh:mm:ss)                  : 00:20:00   
Loopback Port                        : 4   
Tx rate (Kpbs)                       : 150   
Tx Frame Size (bytes)                : 128   
Tx Frames                            : 1000   
Rx Frames                            : 1000   
Frames Lost                          : 0       

VLAN Name                            : V3   
Port                                 : 5   
IP Address                           : 7.7.7.7   
Status                               : Completed   
Duration (hh:mm:ss)                  : 00:10:00   
Loopback Port                        : 3   
Tx rate (Kpbs)                       : 250   
Tx Frame Size (bytes)                : 256   
Tx Frames                            : 4000   
Rx Frames                            : 4000   
Frames Lost                          : 0       

VLAN Name                            : V12345678901234567890123456789   
Port                                 : invalid port   
IP Address                           : 8.8.8.8   
Status                               : Error   
Duration (hh:mm:ss)                  : 00:02:00   
Loopback Port                        : 7   
Tx rate (Kpbs)                       : 100   
Tx Frame Size (bytes)                : 9100   
Error                                : Failed to communicate with peer switch        

History

This command was first available in ExtremeXOS 15.3.

Platform Availability

This command is available on Summit X450-G2, X460-G2, X670-G2, X770, ExtremeSwitching X440-G2, X620 series switches, and stacking.