configure esrp aware delete selective-forward-ports

configure esrp domain aware delete selective-forward-ports all|port_list {group group number }

Description

Disables all or part of selective forwarding by deleting ports from the ESRP (Extreme Standby Router Protocol)-aware port list.

Syntax Description

domain Specifies an ESRP domain name.
all Specifies that all of the ports are to be disabled.
port_list Specifies the ports to be disabled from the ESRP-aware port list.
group number Specifies the ESRP group within the given domain name

Default

The group number defaults to '0'.

Usage Guidelines

By configuring selective forwarding, you create an ESRP-aware port list of only those ports that forward to the ESRP groups that are associated with an ESRP-aware VLAN (Virtual LAN). That port list is used for forwarding ESRP PDUs from the selected ports only of an ESRP-aware switch.

Use this command to delete one or more or all of the ports from an ESRP-aware port list. Deleting all of the ports puts the domain back to the default state.

Example

The following command configures esrp domain (d1) to exclude ESRP PDUs on ports 5:1, 5:2, and 6:2.

configure esrp d1 aware delete selective-forward-ports 5:1,5:2,6:2 group 0

History

This command was first available in Extreme XOS 12.0.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.