configure isis area timer lsp-gen-interval

configure isis area area_name timer lsp-gen-interval seconds {level[1| 2]}

Description

This command configures the minimum time required to wait before regenerating the same LSP.

`area_name`	Specifies the router process for which you want to configure the LSP generation interval.
`seconds`	Specifies the generation level in seconds. The range is 1 to 120 seconds.
level	Specifies the level to which you want to apply the configuration. If neither level 1 nor level 2 is specified, the configuration applies to both levels.

30 seconds.

In link flapping situations in a mesh network, this can greatly reduce the amount of network traffic generated from LSP flooding.

The following command sets the LSP generation interval to a value of 40 seconds:

configure isis area areax timer lsp-gen-interval 40

This command was first available in ExtremeXOS 12.1.

This command is available on platforms with a Core license.

Published August 2017prev | next