configure lldp transmit-delay

configure lldp transmit-delay [ auto | seconds]


Configures the delay time between successive frame transmissions initiated by a value change or status change in any of the LLDP (Link Layer Discovery Protocol) local systems Management Information Base (MIB).

The auto option uses a formula (0.25 * transmit-interval) to calculate the number of seconds.

Syntax Description

auto Uses the formula (0.25 * transmit-interval) to calculate the seconds.
seconds Specifies the interval at which LLDP notifications are sent. The range is 1 to 8291.


2 seconds.

Usage Guidelines

This is the timer between triggered updates.


The following command configures the delay between LLDP frame transmissions for triggered updates to be automatically calculated:

configure lldp transmit-delay auto


This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.