configure mirror to port

configure mirror mirror_name {to [port port | port_list port_list | loopback portport] ] {remote-tag rtag | port none}


Updates or specifies the "to port" definitions for a named mirroring instance.

Syntax Description

mirror_name Specifies the mirror name.
port Specifies the mirror output port.
port_list Specifies the list of ports where traffic is to be mirrored.
loopback port Specifies an otherwise unused port required when mirroring to a port_list. The loopback-port is not available for switching user data traffic.
port Specifies a single loopback port that is used internally to provide this feature.
remote-tag Specifies the value of the VLAN (Virtual LAN) ID used by the mirrored packets when egressing the monitor port.
port Specifies the port definition for the mirroring instance.
none Specifies none for the to port definition.



Usage Guidelines

Use this command to update, or specify the "to port" definitions for a named mirroring instance.

The none keyword can be used to remove a previously configured port/port-list on a disabled mirror instance.


The following example configures a mirror instance to port 3, slot 4 :

configure mirror to port 3:4


This command was first available in ExtremeXOS 15.3.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.