Unconfigures the IPv4 and IPv6 masks.
Specifies the ports.
Use this command to remove masks for the IPv4 and IPv6 source and destination address fields on ports. These masks were defined using one or more of the following commands:
The following command removes a mask on port 2:1:
unconfigure ip-fix ports 2:1 flow-key mask
This command was first available in ExtremeXOS 12.5.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.