configure stpd tx-hold-count
Description
Configures the maximum BPDUs transmitted per second.
Syntax Description
stpd_name | Specifies an STPD name on the switch. |
tx_hold_count | Specifies the maximum number of BPDUs transmitted per second. The valid range is 1–10. |
Default
By default, the maximum number of BPDUs transmitted per second is 6.
Usage Guidelines
The transmit hold count is used by the port transmit state machine to limit BPDU transmission rate.
Example
The following example configures the transmit hold count for STP domain r1 to five BPDUs per second:
configure stpd r1 tx-hold-count 5
History
This command was first available in ExtremeXOS 15.7.1.
Platform Availability
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.